CNC bridge saw
For primary cutting, straight runs, mitres and core profiles.
Envelope: 126 × 63 inFabrication capabilities · GTA
Can your drawing be made in stone?
Check the working envelope, files and target tolerances. We confirm final feasibility against the selected material and detail.
CNC and waterjet cuttingNatural and engineered stone
Working envelopeDrawing review
126 × 63
Maximum slab inchesTarget cut line ± 1/32 inAccepted files 5 formats
File inFeasibility checkStone out
Maximum slab126 × 63 inches
Thickness1/4 to 1 1/4 inches
Accepted filesDWG, DXF, PDF, STEP, 3DM
DeliveryCrated and labelled across the GTA
Working envelope
The useful limits, in one place.
Custom profiles, large pieces and fragile materials are reviewed from the drawing before they enter the schedule.
- Machinery
- CNC bridge saw, 5-axis machining centre, waterjet, edge polishing line and hand-finishing bay
- Edge profiles
- Eased, bevelled, bullnose, ogee, mitred and custom profiles to drawing
- Materials
- Granite, marble, quartzite, limestone, travertine, porcelain, sintered stone and engineered quartz
- Bookmatching
- Available with slab layout approved before cutting
- Scheduling
- Capacity is reserved against the approved scope and delivery date
Equipment on the floor
Different cuts go to different machines.
The drawing determines the route through the shop. We do not force brittle, curved or repeat work through the same process.
5-axis centre
For nosings, curved work, sinks and custom profiles.
Envelope confirmed at reviewWaterjet
For inlays, brittle slabs, thin pieces and tight openings.
Toolpath compensatedEdge polishing line
For repeat profiles and matching visible edges across a run.
Five finish familiesDrawing checklist
What the file must show.
- Units
- Inches, decimal preferred
- Dimensions
- Overall size, cut-out locations, edge profiles and finish notes
- Fixtures
- Model or manufacturer template, not a nominal size
- Layers
- Separate cut, profile and annotation layers
- Upload
- Maximum 50 MB per file
Target tolerances
What we measure before release.
- Cut line
- ± 1/32 in
- Cut-out position
- ± 1/32 in
- Edge straightness
- 1/32 in over 8 ft
- Thickness variation
- ± 1/32 in
Material or profile limits are stated during drawing review before the quote becomes binding.
Check your project
Send the drawing before you commit the detail.
Include the material, quantity, finish and required delivery date. We will flag missing information and confirm the fabrication route.